Table of Contents
Advertisement
Figure 19. Removing the system cover
Installing the system cover
Prerequisites
1
Follow the safety guidelines listed in
2
Ensure that all internal cables are routed correctly and connected, and no tools or extra parts are left inside the system.
Steps
1
Align the tabs on the system cover with the guide slots on the system.
2
Push the system cover latch down.
The system cover slides forward, the tabs on the system cover engage with the guide slots on the system and the system cover latch
locks into place.
3
Using a flat or Phillips head screwdriver, rotate the latch release lock clockwise to the locked position.
Safety
instructions.
Dell EMC PowerEdge R740 Installation and Service Manual
Installing and removing system components
69
Advertisement
Table of Contents
