Table of Contents
Advertisement
Figure 62. Installing riser 2 and 3 blank
Next steps
1
Install the air shroud.
2
Follow the procedure listed in
Related links
Installing the air shroud
Removing riser 3 blank
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Steps
1
Using Phillips #2 screwdriver, loosen the screw that secures the blank to the system.
2
Lift the blank away from the system.
114
Dell EMC PowerEdge R740 Installation and Service Manual
Installing and removing system components
After working inside your
system.
Safety
instructions.
Before working inside your
system.
Advertisement
Table of Contents
