Table of Contents
Advertisement
Figure 73. Removing the optional IDSDM/vFlash card
Next steps
Install the optional IDSDM/vFlash card.
Related links
System board jumpers and connectors
Removing the expansion card from expansion card riser
Removing the micro SD card
Installing the optional IDSDM/vFlash card
Installing the optional IDSDM/vFlash card
Prerequisites
Follow the safety guidelines listed in
Steps
1
Locate the IDSDM/vFlash connector on the system board.
To locate IDSDM/vFlash, see the System board jumpers and connectors section.
2
Align IDSDM/vFlash card with the connector on the system board.
3
Push IDSDM/vFlash card until it is firmly seated on the system board.
126
Dell EMC PowerEdge R740 Installation and Service Manual
Installing and removing system components
Safety
instructions.
Advertisement
Table of Contents
