Table of Contents
Advertisement
Figure 18. Installing the optional front bezel with the LCD panel
System cover
System cover provides security for the entire system and also helps in maintaining proper air flow inside the system.
Removing the system cover
Prerequisites
1
Follow the safety guidelines listed in
2
Turn off the system, including any attached peripherals.
3
Disconnect the system from the electrical outlet and disconnect the peripherals.
Steps
1
Using a flat or a Phillips head screwdriver, rotate the latch release lock counter clockwise to the unlocked position.
2
Lift the latch till the system cover slides back and the tabs on the system cover disengage from the guide slots on the system.
3
Hold the cover on both sides, and lift the cover away from the system.
68
Dell EMC PowerEdge R740 Installation and Service Manual
Installing and removing system components
Safety
instructions.
Advertisement
Table of Contents
