07/2011
1004001-01
–
Remove the canopy panel with the aid of a helper.
The assembly is the same process in reverse order.
When assembling please note:
–
Carefully lay the canopy panel in the guide.
–
Support the canopy panel with one hand so that it does not fall down.
–
Refit and retighten the scres Refit the middle screws first and then the
outer screws.
–
Remove fingerprints and other soiling carefully.
5.7.3
Open the bed base
–
Remove the screws.
–
Raise the acrylic glass panel and grasp the recessed grip.
–
Lift up the bed base.
Cleaning and maintenance
Operating instructions – 47