Upgrade Of Picture Firmware - RGBlink VSP 737 User Manual

Upgrade of Picture Firmware:

Upgrade all the four USB ports to improve the picture quality, operations
are as below：
1. Plug USB in USB port;
2. After the device is powered on, go into Menu and select items in turns
as below: MENU—〉VIDEO FU –〉SELECT PORT。
3. Select the needed USB port for upgrade, LCD screen shows ―Firmware
upgrades, please wait‖.
4. ―Update Main Board Update Success‖ means upgrade is finished,
change to upgrade another USB port, operations are the same as the
above;
5. Power off and power on again to check if the device works normally.
VSP 737 User Manual 83