Table of Contents
Advertisement
5. System setting and operation
How to adjust size and position of output pictures
How to Adjust Output Resolution
Firstly assure the device is powered on.
Device is in Normal Operation.
Key operation as below:（Factory setting parameter）
1. Tap
2. LCD screen shows：
3. Tap NEXT, rotate the knob, adjust picture width, tap NEXT again to
confirm the adjusting;
4. Rotate the knob again to adjust picture height, picture X position,
picture Y position, tap NEXT to confirm;
Note
VSP 737
SCALE WIDTH B:
>1024
SCALE HEIGHT B:
>1024
SCALE POS X B:
>0
SCALE POS Y B:
>0
System default picture start point（0，0）
locates at top left corner.
User Manual
Details are in: How to Confirm the
61
Advertisement
Table of Contents
