Menu - RGBlink VSP 737 User Manual

4.Menu Orientation

MENU

Set Brightness：For adjusting the brightness of pictures；
Set Contrast：For adjusting the color contrast of pictures；
Set Saturation：For adjusting the color temperature value of pictures;
Set Color Red ：For adjusting the redness of pictures；
Set Color Green：For adjusting the greenness of pictures；
Set Color Blue：For adjusting the blueness of pictures；
User can do the setting according to needed effects; it is mainly for
professionals who are skillful at picture quality. For any mis-operations,
user can go to factory reset.
The adjusting range for this function is 0~100.
MENU ---Gamma
Gamma value reflects the brightness. When Gamma value equals to 1, it
means the density of input and output signals is equal, when Gamma
value is greater than 1, the output signal will be brighten, when Gamma
value is less than 1, the output signal will be darken. Thus the Gamma
value is ought to be 1 for the primitiveness of pictures.
MENU ---AB Mode
Press Menu to go back main menu and use the Knob button and Next to
go into Crop setting sub menu. 【AB Mode】：Full screen switch，Full
screen transparent switch，Open ceremony switch，Open ceremony
transparent switch but also other fourteen seamless transition effects:
wipe right, wipe left, wipe up, wipe down, wipe center out, wipe curtain out,
wipe square out, etc.
Run knob switch and select AB Mode; Stretch includes: CUT Switch wipe
right, wipe left, wipe up, wipe down, wipe center out, wipe curtain out,
wipe square out etc. And DISSOVLE Switch
VSP 737 User Manual 51