How To Crop Input Pictures - RGBlink VSP 737 User Manual

5. System setting and operation
How to crop on input pictures

How to Crop Input Pictures

Firstly assure the device is powered on.
Device is in Normal Operation.
Key operation is as below: (Factory setting parameter)
1. Tap
2. LCD screen shows:
3. Tap NEXT, rotate the knob, adjust cropped picture's width, tap NEXT to
confirm the adjusting value;
4. Rotate the knob again to adjust cropped picture's height, crop picture X
position and Y position, tap NEXT to confirm;
Note
VSP 737
CROP WIDTH B:
>1024
CROP HEIGHT B:
>1024
CROP POS X B:
>0
CROP POS Y B:
>0
System default picture start point（0，0）
locates at top left corner.
User Manual
Details are in: How to Confirm the
62