Data Processing Via Irda - Ecom CN Operating Instructions Manual

7.2. Data processing via IRDA

The following possibilities are available for data processing via IRDA:
1.Using the measurement data management programme MiniDV
(gratis software from ecom GmbH).
Hereto the following adjustments must be made at the ecom-CN:
Adjustments-Internal-Baud rate->IRDA
and
Adjustments-Internal-Online data->none
2.Using the online data record programme DASNT
(gratis software from ecom GmbH).
Hereto the following adjustments must be made at the ecom-CN:
Adjustments-Internal-Baud rate->IRDA
and
Adjustments-Internal-Online data->DAS
3.Using the PDA solution
The infrared interface of the PDA can be used to transfer measure-
ment data stored temporarily from the ecom-CN into the PDA.
ecom GmbH offers a programme called CNIrDA which can be start-
ed as process e.g. from a management programme for chimney
sweepers. By calling-up, this programme performs the communica-
tion between PDA and instrument and provides with an ANSI text file
named ECOM.TXT as a result. This file covers the measurement
results transferred from the instrument to the PDA. To transfer data
blocks from the ecom-CN to the PDA, the following adjustments
must be made at the instrument:
Adjustments-Internal-Baud rate-IRDA
and
Adjustments-Internal-Online data DS->COM
The communication will not function without these adjustments.
Once the programme is called up, it will be tried via infrared signal to
establish a communication to the ecom-CN. Hereto both the inter-
faces of the instrument and of the PDA must be directed in front of
each other. Press the button „Back" to stop the search. The pro-
grammes is then finished and no file ECOM.TXT is written.
ecom-CN Page 17