Interfaces And Functions - SMA 5000TL Operating Manual

SMA Solar Technology AG
Symbol
4.2

Interfaces and Functions

The inverter can be equipped or retrofitted with the following interfaces and functions:
BLUETOOTH
All inverters manufactured after a certain date include BLUETOOTH as standard equipment. Via
BLUETOOTH, the inverter can communicate with various BLUETOOTH devices (for information on
supported SMA products, see www.SMA-Solar.com).
SMA Speedwire/Webconnect
The inverter is equipped with SMA Speedwire/Webconnect as standard. SMA Speedwire/
Webconnect is a type of communication based on the Ethernet standard. This enables inverter-
optimized 10/100 Mbit data transmission between Speedwire devices in PV systems and the
software Sunny Explorer. The Webconnect function enables direct data transmission between the
inverters of a small-scale system and the Internet portal Sunny Portal without any additional
Operating Manual
Explanation
WEEE designation
Do not dispose of the product together with the household waste but in
accordance with the locally applicable disposal regulations for electronic
waste.
CE marking
The product complies with the requirements of the applicable EU direc-
tives.
Device class ID (printed only if the inverter is equipped with BLUE-
TOOTH)
The product is equipped with a wireless component and complies with
device class 2.
Degree of protection IP65
The product is protected against dust intrusion and water jets from any
angle.
The product is suitable for outdoor installation.
Certified safety
The product is VDE-tested and complies with the requirements of the Ger-
man Equipment and Product Safety Act.
RCM (Regulatory Compliance Mark)
The product complies with the requirements of the applicable Australian
standards.
4 Product Description
STP5-12TL-20-BE-en-15 17