Interfaces And Functions - SMA SUNNY TRIPOWER CORE2 Operating Manual

5 Product Overview
Icon
RoHS
5.3

Interfaces and Functions

User interface for configuration and monitoring
The product is equipped as standard with an integrated webserver, which provides a user interface
for configuring and monitoring the product.
Once the connection has been established to the smart device, use a terminal (e.g. smartphone,
tablet or laptop) to connect to the product's user interface using a web browser.
Modbus
The product is equipped with a Modbus interface. The inverter is delivered with the Modbus
interface activated as standard.
The Modbus interface of the supported SMA products is designed for industrial use – via SCADA
systems, for example – and has the following tasks:
• Communication of the inverter with the SMA Data Manager
• Remote query of measured values
• Remote setting of operating parameters
• Setpoint specifications for system control
Grid management services
The product is equipped with service functions for grid management.
Depending on the requirements of the grid operator, you can activate and configure the functions
(e.g. active power limitation) via operating parameters.
SMA Smart Connected
SMA Smart Connected is the free monitoring of the product via the SMA Sunny Portal. Thanks to
SMA Smart Connected, the operator and qualified person will be informed automatically and
proactively about product events that occur.
20 STP110-60-BE-en-13
Explanation
Degree of protection IP66
The product is protected against the penetration of dust and water that is di-
rected as a strong jet against the enclosure from all directions.
CE marking
The product complies with the requirements of the applicable EU directives.
UKCA marking
The product complies with the regulations of the applicable laws of England,
Wales and Scotland.
RoHS labeling
The product complies with the requirements of the applicable EU directives.
SMA Solar Technology AG
Operating manual