Interfaces And Functions - SMA STP 17000TL-30 Operating Manual

4 Product Overview
Symbol
RoHS
4.3

Interfaces and Functions

The inverter can be equipped or retrofitted with the following interfaces and functions:
16 STP15-25TL-30-BE-en-17
Explanation
Observe the documentation
Together with the red LED, this symbol indicates an error.
No function
Three-phase alternating current with neutral conductor
Direct current
The product has no galvanic isolation.
WEEE designation
Do not dispose of the product together with the household waste but in accor-
dance with the disposal regulations for electronic waste applicable at the in-
stallation site.
The product is suitable for outdoor installation.
Degree of protection IP65
The product is protected against the penetration of dust and water that is di-
rected as a jet against the enclosure from all directions.
CE marking
The product complies with the requirements of the applicable EU directives.
RoHS labeling
The product complies with the requirements of the applicable EU directives.
RCM (Regulatory Compliance Mark)
The product complies with the requirements of the applicable Australian stan-
dards.
The product complies with the Moroccan safety and EMC requirements for
electronic products.
SMA Solar Technology AG
Operating manual