Interfaces And Functions - SMA SUNNY TRIPOWER 5.0 SMART ENERGY Operating Manual

4 Product Overview
Icon
RoHS
4.3

Interfaces and Functions

The product is equipped with the following interfaces and functions:
User interface for configuration and monitoring
The product is equipped as standard with an integrated webserver, which provides a user interface
for configuring and monitoring the product.
Once the connection has been established to the smart device, use a terminal (e.g. smartphone,
tablet or laptop) to connect to the product's user interface using a web browser.
Smart Inverter Screen
The Smart Inverter Screen enables you to view the status display and to display the current power
and consumption on the user interface login page. This gives you an overview of the most important
product data without having to log into the user interface.
The Smart Inverter Screen is deactivated by default. The Smart Inverter Screen can be activated via
the user interface once the product has been commissioned.
20 STPx0-3SE-40-BE-en-10
Explanation
WEEE designation
Do not dispose of the product together with the household waste but in accor-
dance with the disposal regulations for electronic waste applicable at the in-
stallation site.
The product is suitable for outdoor installation.
Degree of protection IP65
The product is protected against the penetration of dust and water that is di-
rected as a jet against the enclosure from all directions.
CE marking
The product complies with the requirements of the applicable EU directives.
UKCA marking
The product complies with the regulations of the applicable laws of England,
Wales and Scotland.
RoHS labeling
The product complies with the requirements of the applicable EU directives.
RCM (Regulatory Compliance Mark)
The product complies with the requirements of the applicable Australian stan-
dards.
The product complies with the Moroccan safety and EMC requirements for
electronic products.
SMA Solar Technology AG
Operating Manual