Activating And Operating The Display - SMA 5000TL Operating Manual

SMA Solar Technology AG
Position
F
G
H
I
K
L
M
N
O
P
Q
R
9.3

Activating and Operating the Display

You can activate and operate the display by tapping on the enclosure lid.
Procedure:
1. Activate the display. Tap on the enclosure lid once.
☑ The backlight is switched on.
Operating Manual
Symbol Explanation
Utility grid
- Event number of an error on the utility grid side
- Output voltage or output current of a line conductor
- Event number of an error in the inverter
Grid relay
When the grid relay is closed, the inverter feeds into the utility
grid.
When the grid relay is open, the inverter is disconnected from
the utility grid.
Inverter
- Input voltage or input current of a line conductor
- Event number of an error on the PV array side
- Text line to display event and error messages
PV array
- Diagram with the power curve of the last 16 feed-in hours or
energy yields of the last 16 days
• In order to switch between diagrams, tap once on the
enclosure lid.
You can operate the display by tapping on the enclosure lid
(see Section 9.3, page 55).
The displayed error must be rectified on-site by a qualified per-
son (for troubleshooting, see service manual at www.SMA-So-
lar.com).
The displayed error cannot be rectified on-site.
• Contact the Service (see Section 13, page 70).
STP5-12TL-20-BE-en-15
9 Operation
55