Table of Contents
Advertisement
Local precedence re-marking configuration
example
IMPORTANT:
This example is available only on the HPE 3100 v2 EI switches.
Network requirements
As shown in
Device. The network is described as follows:
•
Host A and Host B are connected to Ethernet 1/0/1 of Device.
•
The data server, mail server, and file server are connected to Ethernet 1/0/2 of Device.
Configure priority marking on Device to satisfy the following requirements:
Traffic source
Host A, B
Host A, B
Host A, B
Figure 18 Network diagram
Configuration procedure
# Create advanced ACL 3000, and configure a rule to match packets with destination IP address
192.168.0.1.
<Device> system-view
[Device] acl number 3000
[Device-acl-adv-3000] rule permit ip destination 192.168.0.1 0
[Device-acl-adv-3000] quit
# Create advanced ACL 3001, and configure a rule to match packets with destination IP address
192.168.0.2.
[Device] acl number 3001
[Device-acl-adv-3001] rule permit ip destination 192.168.0.2 0
Figure
18, the company's enterprise network interconnects hosts with servers through
Destination
Data server
Mail server
File server
51
Processing priority
High
Medium
Low
Advertisement
Table of Contents
