Summary of Contents for HPE Aruba Networking 6200F
Page 1
HPE Aruba Networking CX 6200F Switches and Accessories Start Here: Installation, Safety, and Regulatory Information Published: January 2024 Edition: 3...
Page 2
Hewlett Packard Enterprise Company. To obtain such source code, please check if the code is available in the HPE Software Center at https://myenterpriselicense.hpe.com/cwp-ui/software but, if not, send a written request for specific software version and product for which you want the open source code.
All Product Documentation For the latest release of hardware and software documentation for HPE Aruba Networking switches and accessories, including the Installation and Getting Started Guide, which provides detailed installation instructions, visit the Aruba Support Portal at the following link: https://asp.arubanetworks.com/downloads...
HPE Aruba Networking CX 6200F 48G Class 4 PoE 4SFP 740W Switch (S0M85A) Overview The HPE Aruba Networking CX 6200F Switch Series is a family of edge networking stackable switches, ideal for enterprise network access. They provide the foundation for high-performance networks supporting IoT, mobile, and cloud applications.
Transceiver Guide Power cords HPE Aruba Networking includes the power cord intended for use with your HPE Aruba Networking switch. Different countries/regions may require different power cords. For a list of the power cords that apply to your switch, see the section that lists power cords in the latest edition of the Installation and Getting Started Guide for your switch.
OnlyHPE Aruba Networking-approved power cords may be used with HPE Aruba Networking devices. To access power cord information for your switch, see the latest edition of the HPE Aruba Networking CX 6200F/M Installation and Getting Started Guide. Lost or damaged power cords must be replaced only with HPE Aruba Networking-approved power cords.
Page 7
Table 1: Environmental Specifications for all HPE Aruba Networking CX 6200F switch models Aruba CX 6200F Switches Operating temperature 32°F to 113°F (0°C to 45°C) up to 5,000 ft; Derate -1°C for every 1,000 ft from 5,000 ft to 10,000 ft Non-operating temperature 5% to 95% @ 104°F (40°C) non-condensing...
Page 8
Weight Dimensions (W x D x H) Switch HPE Aruba Networking CX 6200F 24G 4.39 kg (9.68 lbs) 44.25 cm x 30.43 cm x 4.37 cm Class 4 PoE 4SFP+ 370W Switch (JL725B) (17.42 in x 11.98 in x 1.72 in)
For important safety, environmental, and regulatory information, see Safety and Compliance Information for Server, Storage, Power, Networking, and Rack Products, available at http://www.hpe.com/support/Safety-Compliance-EnterpriseProducts. Table 3: Safety and Regulatory information for HPE Aruba Networking CX 6200F switches JL724B, JL725B, JL726B, JL727B, JL728B, S0M81A,...
Page 12
Use only an approved Laser Class 1 SFP and/or SFP+ transceiver. Electrical Frequency Maximum Maximum Model Description voltage current range power JL724B HPE Aruba Networking CX 100-120V 0.9A 50/60 Hz 120W 6200F 24G 4SFP+ Switch 200-240V 0.6A JL725B HPE Aruba Networking CX 100-120V 5.2A 50/60 Hz...
Aruba. For important safety, environmental, and regulatory information, see Safety and Compliance Information for Server, Storage, Power, Networking, and Rack Products, available at http://www.hpe.com/support/Safety-Compliance-EnterpriseProducts Taiwan EMC Class A Statement Japan VCCI Class A statement Korea EMC Class A statement...
6200F Switch NOTE: This section previews the steps for installing the HPE Aruba Networking CX 6200F Switch. To find detailed switch installation steps, information on configuration tools, and other instructions and information, see the latest Installation and Getting Started Guide for your switch.
5. Connect the switch to a power source. 6. (Optional) Install transceivers. 7. Connect the network cables. 8. Configure the switch for network operation. Documentation feedback Send any errors, suggestions, or comments to Documentation Feedback (hpe- arubatechpub@hpe.com). Start Here: Installation, Safety, and Regulatory Information...