# Configure the switch to use SP queuing.
[Sysname] qos sp global
Configuring WRR queuing
Configuration procedure
The congestion management settings on the HPE 3100 v2 Switches Series are made in system view
and apply to all ports of the switch.
To configure WRR queuing:
Step
1.
Enter system view.
2.
Enable WRR queuing on
the switch.
3.
Configure the scheduling
weight for a queue.
4.
Display WRR queuing
configuration.
Configuration example
Network requirements
•
Enable WRR on the switch.
•
Assign queues 0 through 3 to the WRR group, with their weights being 1, 2, 4, and 6,
respectively.
Configuration procedure
# Enter system view.
<Sysname> system-view
# Configure WRR queuing on the switch.
[Sysname] qos wrr global
[Sysname] qos wrr global 0 group 1 weight 1
[Sysname] qos wrr global 1 group 1 weight 2
[Sysname] qos wrr global 2 group 1 weight 4
[Sysname] qos wrr global 3 group 1 weight 6
Command
system-view
qos wrr global
qos wrr global queue-id group 1
weight schedule-value
display qos wrr global [ | { begin |
exclude | include }
regular-expression ]
46
Remarks
N/A
Optional.
By default, WRR queuing is
enabled on the switch.
By default, the weights of
queues 0 through 3 are 1, 2, 3,
and 4, respectively.
Optional.
Available in any view