QoS configuration approaches
You can configure QoS in these approaches:
•
MQC approach
•
Non-MQC approach
Some features support both approaches, but some support only one.
MQC approach
Only the HPE 3100 v2 EI switches support the MQC approach.
In modular QoS configuration (MQC) approach, you configure QoS service parameters by using
QoS policies (see
Non-MQC approach
In non-MQC approach, you configure QoS service parameters without using a QoS policy. For
example, you can use the line rate feature to set a rate limit on an interface without using a QoS
policy.
"Configuring a QoS policy (available only on the HPE 3100 v2
18
EI)").