Table of Contents
Advertisement
Step
8.
Create a policy and enter
policy view.
9.
Associate the class with the
traffic behavior in the QoS
policy.
10. Return to system view.
11. Apply the QoS policy.
Configuring GTS
The Switch Series supports queue-based GTS, which shapes traffic of a specific queue.
To configure GTS:
Step
1.
Enter system view.
2.
Enter interface view or
port group view.
3.
Configure GTS for a
queue.
Configuring the line rate
The line rate of a physical interface specifies the maximum rate of incoming packets or outgoing
packets.
To configure the line rate:
Step
1.
Enter system view.
2.
Enter interface view
or port group view.
Command
qos policy policy-name
classifier tcl-name behavior
behavior-name
quit
•
Applying the QoS policy to an
interface
•
Applying the QoS policy to online
users
•
Applying the QoS policy to a VLAN
•
Applying the QoS policy globally
Command
system-view
•
Enter interface view:
interface interface-type
interface-number
•
Enter port group view:
port-group manual
port-group-name
qos gts queue queue-number
cir committed-information-rate
[ cbs committed-burst-size ]
Command
system-view
•
Enter interface view:
interface interface-type
interface-number
•
Enter port group view:
port-group manual
port-group-name
39
Remarks
N/A
N/A
N/A
Choose one application
destination as needed.
Remarks
N/A
Use either command.
Settings in interface view take effect on
the current interface. Settings in port
group view take effect on all ports in the
port group.
N/A
Remarks
N/A
Use either command.
Settings in interface view take effect on the
current interface. Settings in port group view
take effect on all ports in the port group.
Advertisement
Table of Contents
