Figure 6 Priority mapping procedure for an Ethernet packet
Configuration guidelines
You can modify priority mappings by modifying priority mapping tables, priority trust mode on a port,
and port priority.
Hewlett Packard Enterprise recommends planning QoS throughout the network before making your
QoS configuration.
Configuring a priority mapping table
Step
1.
Enter system
view.
2.
Enter priority
mapping table
view.
3.
Configure the
priority mapping
table.
Command
system-view
qos map-table { dot1p-lp | dscp-lp }
import import-value-list export export-value
29
Remarks
N/A
N/A
Newly configured
mappings overwrite the
old ones.