General - Bodet Sigma Mod Installation And Start-Up Instructions Manual

1) General

The Sigma is a master clock which can be used to control receiver clocks and
heating circuits, lighting, ringing, access at the doors of the building, etc.
The SIGMA has functions which can be programmed from the technician
menu.
On first installation, it is essential to program the technician menu (see
page 32) before the customer menu.
It is also essential when installing the SIGMA to program the technician
functions in the order in which they appear in the menu.
This product must be installed in a residential, commercial or light industry
environment.
Bodet declines all responsibility in the event of an accident resulting from use
not in accordance with the recommendations of this manual.
CAUTION :
Any modification on the product renders the guarantee null and void.
Checking the equipment:
One SIGMA master clock.
One USB key,
One CD containing the PC software.
The CD supplied with your unit contains a program allowing you to carry out
the programming. The programming can thus be carried out simply on a PC
and transferred via the USB port of the Sigma (see "USB loading and backup",
page 19).
To verify the model of the master clock,
press the key.
SIGMA MOD
5