Flashforge Dreamer User Manual page 59

3. A connection called "USR-WiFi232-G2" can be found on the list of available
networks. Connect to this network.
4. Open your Internet browser. Type in "10.10.100.254" and hit
keyboard. Enter the username and password to login. The default username and
password are both "admin" .The control panel will appear after a successful login.
5. Click on [Work Mode]
Notice: In STA mode, there may be the risk that Dreamer couldn't be connected
via WiFi forever, if STA mode is set in error.
6. Click on [STA
password and save.
Dreamer User Guide | www.FlashForge.com
and choose "AP+STA
Setting], select a working network, enter the corresponding
7-2
mode" and save it.
7-3
59
[Enter] on your
400- 699-1063