Flashforge Dreamer User Manual page 44

Method 2: Press the shortcut
⑦ Auto Layout All
[Edit]--[Auto Layout All]
Click
models will be placed automatically as automatic placement rule.
⑧ Repair Models
[Edit]--[Repair Models]
Click
⑨ Supports
Click [Edit]--[Supports]
6.2.14 Print Menus
① Connect Machine
You can connect the Dreamer with your PC via a USB cable or WiFi.
Note: The machine icon on the bottom right displays the connection status:
Connected
Disconnected
Method 1：Connect Via USB Cable
a. Connect your Dreamer with your PC via an USB cable.
b. Turn on your Dreamer and start FlashPrint.
c. Click [Print]--[Connect
option and select machine you want to connect in
not find your machine, click the
Finally click [Connect]
machine after rescan, it means you haven't installed the driver in the software.
Dreamer User Guide | www.FlashForge.com
Delete
after loading one or more than one models, all
to repair models.
to enter supports setting interface.
Machine], then select USB in the
[Rescan]
button to scan your machine and select it.
button to connect to the printer. If you still can not find your
44
[Connection Mode]
[Select Machine]
option. If you can
400- 699-1063