Flashforge Dreamer User Manual page 56

Tap [Setting] to enter the setting
interface
Language: To set the display language
TP Adjust: Adjust the touch screen
Factory Reset: Restore factory defaults
Fan on: To turn on/off the fan
WiFi: To turn on/off the WiFi
Update: To update the firmware
Pulley: To choose the pulley type
Enable filament detector: To enable or
disable filament detector.
Back
Language:
User can select corresponding language
as required.
TP Adjust:
To tap the "+" on the touch screen to
adjust the touch screen.
WiFi:
Turn on the WiFi: Turn on the WiFi,
release the WiFi hotspot and set the
WiFi on computer
Backg
Dreamer User Guide | www.FlashForge.com 400- 699-1063
56