Chapter 3. Unpacking - Flashforge Dreamer User Manual

(Reference video:Unpacking)
This chapter will present you the whole unpacking procedure of Dreamer 3D
printer.(Note: Make sure you read the whole unpacking guide)
1. （3-1）Put Dreamer package on the clean, tidy workbench, using a knife to cut the
tape ,then you can see a quick start guide, which will guide you know our Dreamer
3D Printer, leveling card, and build tape .
2. （3-2）Remove the top protective foam pieces, which also houses the Dreamer's
lid and put them aside. The Dreamer unit and a power cable will then be exposed.
3. （ 3-3 ） Firmly grasp the two side handles of FlashForge Dreamer. Lift it out of the
box and place it on a stable surface. Then you will see the
Dreamer User Guide | www.FlashForge.com

Chapter 3. Unpacking

3-1
3-2
Toolbox
14
and USB cable in
400- 699-1063