XYZ Printing Nobel Superfine User Manual page 18

Printed Object Removal and Cleaning
When removing prints from the printer, follow the procedure to post-process the object and maintain your printer.
Turn the platform locker counterclockwise until it stops. And pull the platform to remove it.
Use the scraper to remove print.
Rinse part in Alcohol (≧ 75% Alcohol) Pour alcohol into the rinse basket, shake the print for 5 minutes, then rub it with your fingers thoughroughly.
Note
1. Always remove the platform before removing the resin tank to avoid dripping leftover material on printer surface.
2. Rinse with 75% alcohol or higher concentration. Washing with alcohol of higher concentration will result in higher cleaning efficiency. Alcohol is not supplied with the
printer.
3. The cleanup time of print depends on of the complexity, structural fineness of the print and other factors, it is recommended not to rinse more than 5 minutes to ensure
that the integrity of the print. Extend proper cleanup time for if necessary.
4. Always ware gloves before touching uncured resin or cleaning prints.
5. Remove any residue on the platform or the resin tank before next print to ensure the printing quality.
Reinstall the platform after cleaning. Push the platform to the end and turn it clockwise with both hands to ensure platform is correctly positioned.
-18-