Table of Contents
Advertisement
B. Also make sure that the printer and the printout setting is optimized by following the tips below.
Optimize the placement and the support structure of the model with the "Rotate", "Support" and "Brim" functions in the software.
●Rotate:
For models of
top-heavy
structure,
with less contact with the
process.
●Support:
For models of
top-heavy
structure,
with overhanging parts
Tips
For larger overhanging parts, please choose the support structure with higher density and larger contact point.
●Brim:
One of the keys to successful printing on the bottom up type SL printer is to ensure the adhesion of the model to the platform.
contact between the models and the platform
For models with non-manifold geometry (black-highlighted in the software), please repair the models before printing.
platform, or
with any larger solid
or
with less contact with the platform
greatly, please check "Brim" while exporting or printing the file. Also add "support" if necessary.
layer, please rotate the model to reduce the effect of peeling force during build
after rotated, please add support structures.
If rotating the model doesn't increase the
Support
Brim
-17-
- Quick Links:
- Resin Care
- Specification
Hide quick links:
Advertisement
Table of Contents
