XYZ Printing Nobel Superfine User Manual page 15

Check Before Every Print
A. Check the following items to ensure printing quality and the operation of the printer.
●Clean the print platform
Scrap off any residue and remove excess resin from the surface of the platform. Make sure there are no prints or residue on the platform. Reinstall the platform, push the
platform to the end and turn it clockwise with both hands to ensure platform is correctly positioned.
●Clear the resin tank
Note
1. Avoid touching the bottom of the resin tank with a sharp, hard tool to avoid damaging the surface coating.
2. Filter the resin after every print may ensure the stability of printing.
3. Resin residing in the black filling tube may drip on the printer case. Please cover the opening of the tube with paper towel before removing the tank.
To remove any residue stuck to the bottom of the resin tank, or to clean the tank thoroughly, follow the procedure for cleaning:
Pour uncured resin in the tank into a waste bin. For the resins left over in the tank, clear the surface of the tank gently with plastic scraper.
Clean the residue stuck on the tank gently with plastic tweezers. Avoid damaging the Teflon surface.
-15-