da Vinci 1.0 Pro
ENERGY SAVE
LED luminaries are installed in the printing chamber. To save energy consumed, the lighting will go off after
idling for 3 minutes (shown as 03M on the display) by default.
SETTINGS
LANGUAGE
ENERGY SAVE
RESTORE DEFAULT
Select "06M" (for auto off after 6 minutes) or "OFF" (for never turn off the LED) and press "OK" to change
the setting.
RESTORE DEFAULT
All settings can be reset to factory default with a few clicks.
SETTINGS
LANGUAGE
ENERGY SAVE 03M
RESTORE DEFAULT
Select "YES" and press "OK" to reset all settings.
INFO
The firmware and printer statistical information, including:
◆ STATISTICS
◆ WIFI INFO
Pro. 1
SETTINGS
INFO
MONITOR MODE
STATISTICS
Show the accumulated printing time and the last printing time. If you want to exit, press "OK".
INFO
STATISTICS
SYSTEM VERSION
CARTRIDGE STATS
SYSTEM VERSION
Show the version information of the current firmware. We suggest upgrading printer firmware to the latest
version to ensure steady quality. To check whether latest version of firmware is available, use XYZware. If you
want to exit, press "OK".
INFO
STATISTICS
SYSTEM VERSION
CARTRIDGE STATS
P 11
ENERGY SAVE [ 03M ]
EN
OFF
03M
03M
06M
RESTORE DEFAULT
EN
ARE YOU SURE?
NO
YES
◆ SYSTEM VERSION
◆ NOZZLE INFO
STATISTICS
LIFE TIME
LAST TIME 00H34m
[OK]
TO RETURN
SYSTEM VERION
0.0.4
[ OK] TO RETURN
◆ CARTRIDGE STATS
◆ HELP
00006H
V.1.3