I Function Display - Icom IC-M88 Instruction Manual

ï BATTERY PACK RELEASE BUTTON
To release the battery pack:
Push the battery release button in the direction (q) of the
arrow as shown below, then the battery pack is released.
To attach the battery pack:
Slide the battery pack on the back of the transceiver in the di-
rection (w) of the arrow then lock it with the battery release
button.
* Slide the battery pack until the battery release button is
locked tightly.
CAUTION!: When pushing the battery release button,
make sure a little sliding the battery pack in the direction
(w) of the arrow to easy to open. Otherwise your fingers
or nails may be injured.
Battery pack
w
q
Battery release button
PANEL DESCRIPTION

I Function display

r t y
e
w
q
q CALL CHANNEL INDICATOR (p. 7)
Appears when the call channel is selected.
w CHANNEL GROUP INDICATOR (p. 7, 15)
"U " appears when U.S.A.; "I " appears when International;
"C " appears when the Canadian; "
LAND channel group is selected.
e TRANSMIT POWER INDICATOR
• "LOW" appears when low power is selected. (p. 9)
• "LOW" blinks when switching forced low power mode be-
cause of a high temperature error or low voltage.
• "MID" appears when middle power is selected. (p. 9)
• No indicator when high power is selected.
u i o !0
!7 !6
" appears when
3
!1
!2
!3
!4
!5
5