Icom IC-M88 Instruction Manual page 23

D Priority scan function "Pr"
The transceiver has 2 scan
types. Normal scan and priority
scan. Normal scan searches all
tag channels in the selected
channel group. Priority scan
searches all tag channels in se-
quence while monitoring Chan-
nel 16.
D Scan resume timer "St"
The scan resume timer can be
selected as a pause (OFF) or
timer scan (ON). When OFF is
selected, the scan pauses until
a received signal disappears.
When ON is selected, the scan
pauses for 5 sec. after receiving
a signal and then resumes even
if the signal is still being re-
ceived.
D Auto scan function "AS"
While in standby, this function
automatically starts the desired
scan (normal or priority scan)
30 sec. after operation.
• Scan indicator blinks while
scanning.
Normal scan (default)
Scan timer OFF (default)
Auto scan OFF (default)
D Dual/Tri-watch function "dt"
This item can be selected as
dualwatch or tri-watch. See p.
14 for details.
D Monitor action selection "Sq"
The monitor function cuts off the
squelch function temporarily.
This selection contains PUSH
or HOLD settings as shown
below.
• PUSH (Pu):
After pushing the [SQL•
MONI
for 1 sec., the squelch function
is cut off until [SQL•
MONI
released. (default)
• HOLD (Ho):
After pushing the [SQL•
MONI
for 1 sec., the squelch function
is cut off continuously until
another key is pushed.
SET MODE
Dualwatch function
(default)
Monitor switch PUSH
] (default)
] is
]
8
17