Land Channel Operation; I Land Channel; I Function Display - Icom IC-M88 Instruction Manual

I LAND Channel

There are 57 LAND channels. This channel group may be
specified for the operating area. Moreover, you can program
max. 22 Free channels, allocated LMR frequency, and your
transceiver can communicate with the LAND transceiver.
Please contact your dealer for details.
q Push [CH/WX•
] to select a regular channel.
U/I/C/L
• If a weather channel appears, push [CH/WX•
w To change the channel group, push [CH/WX•
1 sec several times.
• LAND channel can be selected.
e Push [Y]/[Z] to select a channel.
• "DUP" appears for duplex channels.
Push
NOTE: The basic setting ways (e.g. Call channel program-
ming) are same as the U.S.A., International and Canadian
channels. Refer to the appropriate page for details.

LAND CHANNEL OPERATION

I Function display

Free channel is used for frequency setting. When Narrow,
DTCS or CTCSS frequency is set, function indicator appears
on the LCD.
] again.
U/I/C/L
] for
U/I/C/L
7
Appears when Narrow
is set.
Appears when DTCS
frequency is set.
Appears when CTCSS
frequency is set.
15