Specifications And Options; I Specifications; I Options - Icom IC-M88 Instruction Manual

I Specifications
GENERAL
• Frequency coverage
Marine TX : 156.050–157.425 MHz
RX : 156.050–163.275 MHz
LMR TX/RX : 146.000–174.000 MHz
• Mode
Marine : 16K0G3E (Wide)
LMR : 16K0F3E (Wide)/8K50F3E (Narrow)
• Channel spacing : 25 kHz (Wide)/12.5 kHz (Narrow)
(Narrow is LMR only)
• Current drain (at 7.2 V DC) : TX High (5 W)1.6 A typical
Max. audio200 mA typical
Power save20 mA typical
• Frequency stability : ±5.0 ppm (–20°C to +60°C)
• Usable temperature range
Marine : –20°C to +60°C; –4°F to +140°F
LMR : –30°C to +60°C; –22°F to +140°F
: 62 (W) × 97(H) × 39(D) mm
• Dimensions
(Projections not included) 2
• Weight (approx.; with BP-227) : 280 g (9.9 oz)
TRANSMITTER
• Output power (at 7.2 V DC) : 5 W (Hi), 3 W (Mid) and 1 W (Low)
• Modulation system : Variable reactance frequency modulation
• Max. frequency deviation : ±5 kHz (Wide)/±2.5 kHz (Narrow)
(Narrow is LMR only)
• Audio harmonics distortion : Less than 10 % (at 60 % mod.)
• Spurious emissions : Less than –70 dBc typical
RECEIVER
• Receive system : Double-conversion superheterodyne
• Sensitivity (12 dB SINAD) : 0.25 µV typical
• Squelch sensitivity : Less than 0.35 µV (at threshold)
• Intermodulation rejection ratio : 70 dB typical

SPECIFICATIONS AND OPTIONS

(W) × 3 (H) × 1
7 ⁄ 13 ⁄ 17 ⁄ (D) inch
16 16 32
• Spurious response rejection ratio : 70 dB typical
• Adjacent channel selectivity : 70 (Wide)/60 (Narrow) dB typical
(Narrow is LMR only)
• Ham and noise ratio : More than 40 (Wide)/34 (Narrow) dB
(Narrow is LMR only)
• Audio output power : 0.35 W typical at 10% distortion with an
8 Ω load
All stated specifications are subject to change without notice or obligation.

I Options

• BP-226
BATTERY CASE
Battery case for 5 × AA (R6) alkaline cells. The same as supplied with
the transceiver depending on versions.
• BP-227 -
i on
L I BATTERY PACK
7.2 V/1700 mAh Li-Ion battery pack. The same as supplied with the
transceiver depending on versions.
• BC-119N + AD-100
DESKTOP CHARGER
+ BC-145
AC ADAPTER
For rapid charging of battery packs. An AC adapter is supplied with the
charger. Charging time: approx. 1.5 to 2 hours
• BC-121N - + AD-100
MULTI CHARGER
+ BC-124
AC ADAPTER
For rapid charging of up to 6 battery packs (six AD-100's are required) si-
multaneously. An AC adapter may be supplied depending on version.
Charging time: approx. 1.5 to 2 hours.
• BC-152 + BC-147
DESKTOP CHARGER
Used for regular charging of battery pack. The same as supplied with
the transceiver. Charging time: approx. 9–10 hours
• MB-86
SWIVEL BELT CLIP
Belt clip for swivel type. The same as supplied with the transceiver.
12
CHARGER ADAPTER
(6 pcs.)
CHARGER ADAPTER
AC ADAPTER
25