Download Print this page

Converters.TV 15320 Operation Manual

Dvi/pc/hd to dvi/pc scaler

Advertisement

Quick Links

DVI/PC/HD to DVI/PC Scaler
- ID# 15320
Operation Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the 15320 and is the answer not in the manual?

Questions and answers

Summary of Contents for Converters.TV 15320

  • Page 1 DVI/PC/HD to DVI/PC Scaler - ID# 15320 Operation Manual...
  • Page 2 Introduction This DVI/PC/HD to DVI/PC Scaler is capable of scaling and source- switching from PC (VGA), Component Video (SD/HD) and DVI input signals to analog PC (VGA) and digital DVI outputs. It has the added benefit of control through front panel buttons and IR Remote, and there is on-screen menu (OSD) providing setting selection and system information.
  • Page 3 Supports adjustment of brightness, contrast, color, RGB level, and • Horizontal/Vertical position for the output signal Supportss advanced features such as Noise Reduction and • Overscan/Underscan adjustments • Supports OSD menu, front panel buttons or IR remote controls Operation Controls and Functions Front Panel 1.
  • Page 4 When in the OSD menu mode, press the '+' or '-' button to navigate up or down the menu to the required setting or once a setting is selected with the MENU/Enter button, press the button to adjust setting value of your selected parameter.
  • Page 5 Remote Control POWER: Press the button once to power ON the Scaler. Press again to enter standby mode. INPUT: Press the button repeatedly to toggle through the different input sources Press to directly select the component input. Press to directly select the PC input. HDMI/DVI: Press the button to select DVI (or HDMI) input.
  • Page 6 OSD Menu LAYER LAYER LAYER Video Pickture Mode *1 Standard Vivid Movie User*2 Contrast 1-100 Brightness 1-100 1-100 Saturation 1-100 Sharpness 1-100 H-Position *3 1-100 V-Position *3 1-100 Clock *4 1-100 Phase *4 0-63 Scale Full Overscan Underscan Letterbox Panscan NR *6 High Middle...
  • Page 7: Picture Mode

    Output *8 SVGA SXGA/SXGA+ UXGA WXGA/WXGA+ WSXGA WUXGA 480I/480P 576I/576P 720P50/60 1080I50/60 1080P50/60 NATIVE Exit OSD *9 H-position 1-100 V-position 1-100 Timeout 1-100 Background Exit Information *10 SOURCE INPUT OUTPUT VERSION Note: Settings in Bold Italic are available for the PC input only. 1.
  • Page 8: Noise Reduction

    setting (Brightness, Contrast, etc.) and then press 'Enter' to confirm your selection. The selected setting will turn red, use '+' or '-' buttons to increase or decrease the value of the setting as required. When the adjustment is complete, press the 'Enter' button to leave the setting. Select 'Exit', and then press 'Enter' to exit.
  • Page 9 Timeout: Sets a predetermined time to before the OSD menu is removed from the screen. Background: Selects transparent or solid background of OSD menu. 10. Information Source: Displays the selected input source. Input: Displays the input resolution e.g. XGA. Output: Displays the output resolution e.g. 720p. Version: Displays the firmware version.
  • Page 10: Input Connections

    Connection Diagram Input Connections The Scaler accepts Component, PC and DVI inputs. The formats supported by these inputs are as follows: • When connecting to a PC source, use a D-sub 15-pin cable to connect the output of a PC to the D-sub input connector of the Scaler.
  • Page 11: Output Connections

    • When connecting to a DVI source, use a DVI-I or DVI-D cable to connect the DVI output of a PC or DVD to the DVI input connector of the Scaler. • When connecting to a HDMI source, use a HDMI cable to connect to the HDMI output of a HDMI source, such as DVD player or Set-top Box, on the one end.
  • Page 12 Resolution Output Input format (Up to DVI/HDMI 165MHz) 480i/576i 480p/576p √ √ 720p@50/60 √ √ 1080i@50/60 √ √ 1080p@50/60 √ √ VGA@60/72/75/85 √ √ SVGA@56/60/72/75/85 √ √ √ √ XGA@60/70/75/85 SXGA@60/75/85 √ √ UXGA@60 √ WXGA@60 (1280×800) √ √ WSXGA@60 (1680×1050) √...