Fips Compliance; Configuration Task List; Creating User Roles - HP 5130 EI series Configuration Manual

If the user passes local authorization, the device assigns the user roles specified in the local user
account.
If the user passes remote authorization, the remote AAA server assigns the user roles specified
on the server. The AAA server can be a RADIUS or HWTACACS server.
Non-AAA authorization—When the user accesses the device without authentication or by passing
•
password authentication, the device assigns user roles specified on the user line. This method also
applies to SSH clients that use publickey or password-publickey authentication. User roles assigned
to these SSH clients are specified in their respective local device management user accounts.
For more information about AAA and SSH, see Security Configuration Guide. For more information
about user line, see "Login overview" and "Logging in to the CLI."

FIPS compliance

The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.

Configuration task list

Tasks at a glance
(Required.)
(Required.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)

Creating user roles

In addition to the predefined user roles, you can create up to 64 custom user roles for granular access
control.
To create a user role:
Step
1. Enter system view.
Creating user roles
Configuring user role rules
Configuring feature groups
Changing resource access policies
Assigning user roles
Configuring temporary user role authorization
Command
system-view
Remarks
N/A
50