Logging In Through The Console Port For The First Device Access - HP 5130 EI series Configuration Manual

Hide thumbs Also See for 5130 EI series:
Table of Contents

Advertisement

Logging in through the console port for the first
device access
The first time you access the device, you can only log in to the CLI through the console port.
To log in through the console port, prepare a console terminal (for example, a PC). Make sure the
console terminal has a terminal emulation program, for example, HyperTerminal in Windows XP.
To log in through the console port:
1.
Connect the DB-9 female connector of the console cable to the serial port of the PC.
2.
Connect the RJ-45 connector of the console cable to the console port of the device.
IMPORTANT:
Identify the mark on the console port and make sure you are connecting to the correct port.
The serial ports on PCs do not support hot swapping. If the switch has been powered on, always connect
the console cable to the PC before connecting it to the switch, and always disconnect the console cable
from the switch before disconnecting it from the PC.
Figure 3 Connecting a terminal to the console port
Host
3.
If the PC is off, turn on the PC.
4.
On the PC, launch the terminal emulation program and create a connection that uses the serial port
connected to the device. Set the port properties so the port properties match the following console
port default settings:
Bits per second—9600 bps
Flow control—None
Parity—None
Stop bits—1
Data bits—8
Figure 4
Windows Server 2003, you must add the HyperTerminal program first. On Windows Server
2008, Windows 7, Windows Vista, or another operating system, you must obtain and install a
third-party terminal control program. Then, follow the user guide or online help to log in to the
device.
To start the HyperTerminal on Windows XP:
a.
Click start.
b.
Select All Programs > Accessories > Communications > Hyper Terminal.
To view the serial port connected to the device:
c.
Right-click the My Computer icon on the desktop.
RS-232
Console cable
through
Figure 6
show the configuration procedure on Windows XP HyperTerminal. On
Console port
Device
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents