Managing The Device; Device Management Task List; Configuring The Device Name - HP 5130 EI series Configuration Manual

Managing the device

This chapter describes how to configure basic device parameters and manage the device.
You can perform the configuration tasks in this chapter in any order.

Device management task list

Tasks at a glance
(Required.)
(Required.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)
(Required.)
(Required.)
(Required.)
(Optional.)

Configuring the device name

A device name (also called hostname) identifies a device in a network and is used as the user view
prompt at the CLI. For example, if the device name is Sysname, the user view prompt is <Sysname>.
To configure the device name:
Step
1. Enter system view.
2. Configure the device name.
Configuring the device name
Configuring the system time
Enabling displaying the copyright statement
Configuring banners
Rebooting the device
Scheduling a task
Disabling password recovery capability
Setting the port status detection timer
Configuring CPU usage monitoring
Setting memory thresholds
Configuring the temperature alarm thresholds
Verifying and diagnosing transceiver modules
Restoring the factory-default settings and states
Command
system-view
sysname sysname
111
Remarks
N/A
The default device name is HP.