Packing List - Security Tronix IP BUDDY+ User Manual

2.3.28 PoE power supply
The LAN port supports PoE 802.3at power at 48V and up to 24W.
2.3.29 HDMI signal output
The HDMI output port supports up to a 1080p 60Hz resolution output.
2.3.30 Network bandwidth testing
The network bandwidth test needs two IP BUDDY+ ALL IN 1 meters to test bandwidth: one as a transmitter, the other as a receiver.
2.3.31 Screen image rotates 180 degrees
You can manually rotate the display 180 degrees using the settings.
2.3.32 FTP Server
This requires you to start the tester's Wi-Fi or connect the tester's LAN port to the network. Once the tester is online, start its FTP Server and
directly access files from the tester's SD card. This also allows for the user to upgrade the tester firmware.
2.3.33 Digital Multi-meter
The ST-ALLIN1-TEST has a highly accurate 33/4 digit (6600) built in digital multi-meter. It is used to measure AC and DC voltages, current,
resistance, continuity, capacitance and diode testing. It can switch between auto and manual measuring ranges.

2.4 Packing list

1) IP BUDDY+ ALL IN 1 video monitor and IP test meter
2) 12VDC wall charger
3) Combination cable identifier and network tester (Blue "wand")
4) Polymer lithium ion battery - 7.4VDC 5400mAh (Not plugged in during shipping. Please plug in prior to using meter!)
5) 3 foot BNC test cable
6) 18 inch RS485 test cable with alligator clips
7) 3 foot meter to camera power cable
8) 18 inch 3.5mm audio cable with alligator clips
9) Carrying case and hanging strap with front accessory pouch
10) IP BUDDY+ ALL IN 1 hands free monitor support neck strap with adjustable angle view support
11) User's Manual
12) 8GB SD card
13) Green DC21 Male & Female power adaptors
14) Multi meter test leads (red and black)
5