Security Tronix IP BUDDY+ User Manual page 23

Once you select ONVIF HD or RAPID mode, the meter automatically scans different network segments for ONVIF cameras. It lists the camera
name and IP address on the Device List. If no cameras appear under the device list, try clicking on the Refresh button.
If your IP camera does not appear after scanning the network, you can manually add an IP camera by clicking on the "Add" button on the bottom
left. The URL address should be identical to the ONVIF camera service address. (With your camera's IP address entered into the URL). Click
OK to add the manually entered camera and then click the "Refresh" button.
Click the newly displayed ONVIF camera on the "Device List". The tester will show the IP camera's relative information and settings.
After selecting your ONVIF camera, enter the IP camera's username and password at the top left of the screen and then click "Login". After you
log in, click on the camera under "Device List". Once you are connected to the camera, the following options become available: Identification,
Time Set, Maintenance, Network Set, User Set, Live Video, Video Streaming, Image Set and Profiles.
Live Video: Click "Live Video" to view the live video feed from the IP camera. To make the image full screen, double tap on the video. Stretch
two fingers outward or inward on the touch screen to zoom the image in or out.
19