Security Tronix IP BUDDY+ User Manual page 19

Address: Enter the camera's address. The address setting must match the address of the camera. If they don't match, you will not have PTZ
control.
Once you have your PTZ settings entered properly, you can control it by using touch screen commands. Tap left, right, up or down on the image
to control the PTZ rotation direction and the camera will respond accordingly. Use two fingers to zoom in or out on the PTZ camera.
You may also control the PTZ camera using the PTZ buttons on the bottom of the meter.
Press arrow keys
Press the key to switch on or turn off the iris aperture.
Press the key to manually adjust focus.
Press the key to manually zoom in or out.
RS485/RS232 control
Please make sure the Protocol, Address and Baud Rate match the settings of the PTZ camera or you will not be able to control the camera.
to move the PTZ camera up or down, left or right.
15