Set Up Instructions - Stamina 1764 Owner's Manual

SET UP INSTRUCTIONS

Place the 1764 Magnetic Elliptical Trainer in the area where it will be used. It is recommended that the
1764 Magnetic Elliptical Trainer be placed on an equipment mat. The maximum operation dimensions of
the 1764 Magnetic Elliptical Trainer are approximately 58 inches long x 25.5 inches wide x 64.8 inches
tall. (These dimensions may vary up to one inch.) Make sure that adequate space is available for access
to passage around and emergency dismount from the 1764 Magnetic Elliptical Trainer. A minimum of 20
inches on at least one side and 20 inches either behind or in front of the 1764 Magnetic Elliptical Trainer
is required for safe operation.
LEVELING: There are four points where you can adjust your 1764 Magnetic Elliptical Trainer so it sits
on the floor without any rocking motion when it's used. First, adjust the LEVELING CAPS(47)
on the rear stabilizer of the REAR BASE(2) so that the MAIN FRAME(1) is stable and sits
firmly on the floor. Next, adjust the STANDS(46) to make the REAR BASE(2) stable so that
the 1764 Magnetic Elliptical Trainer sits on the floor without rocking.
MOVING: The 1764 Magnetic Elliptical Trainer has a pair of wheels on the FRONT STABILIZER(80).
Grasp and lift the back end of the REAR BASE(2) to move.
FUNCTION INSPECTION:
Visually inspect the 1764 Magnetic Elliptical Trainer to verify that assembly is as shown in the above
illustration. Check the function of the 1764 Magnetic Elliptical Trainer, stand on the foot pedals and place
your hands at a comfortable position on the handlebars. Slowly move your highest foot forward and follow
the natural path of the machine. Turn the crank slowly through one complete revolution to verify that the
drive train functions properly. Adjust the TENSION KNOB(38) and verify that it functions properly.
CAUTION: Locate and read the WARNING LABEL(98) on the 1764 Magnetic Elliptical Trainer. Make
sure that all users read the WARNING LABEL(98) before using the product.
13
Equipment Mat