Installing And Removing Dimms - Mitsubishi Electric Apricot LS Owner's Handbook Manual

Installing and removing DIMMs

Note the indents along the connector edge, they prevent the DIMM
from fitting into the socket the wrong way round.
1. Turn off the computer and unplug all power cords.
2. Take suitable anti-static precautions and remove the system unit
Caution
If you are unfamiliar with the recommended anti-static precautions and/or the
process of removing the system cover, refer to Appendix A, "The System Unit".
3. Remove carefully the floppy disk drive module which restricts
4. Check the configuration for the upgrade you intend to install. It
To install a DIMM
1. Take the module out of its anti-static packaging. Hold it by its
cover.
access to the memory sockets (first identifying the way all cables
are fitted) by disconnecting the cables, loosening the screws and
lifting out.
may be necessary to remove all of the existing DIMMs, before
going on to install the new modules.
ends and avoid touching the metal contacts.
SYSTEM UPGRADES
4/3