Cleaning And Transporting - Mitsubishi Electric Apricot LS Owner's Handbook Manual

T H E B E G I N N I N G
• Always exit from, or close down Windows. This procedure
• You should always turn off any attached peripherals first.
• To turn off the computer, simply press the P
• After you turn the computer off, wait at least 5 seconds before

Cleaning and Transporting

Your Apricot computer requires little physical maintenance other
than occasional cleaning, but you must take care when transporting
it to avoid damage to some of its more delicate components,
particularly the hard disk.
Warning
Turn off the system unit and unplug all power cords before cleaning or moving
the computer.
Cleaning the computer
Do not use solvents or abrasives, they might damage the system
unit surfaces.
Do not use aerosols or sprays near any part of the system, in
particular, air vents or grills, ports, or removable-media drives, as
microscopic droplets can remain in the air for some time and then
penetrate and cause irreparable damage.
1/4
deletes the temporary files it creates, and will close down all your
applications in an orderly manner. It will prompt you to save any
unsaved work in the process.
However, there is no need to turn off the monitor (if it is
powered from the system unit.)
The power indicator on the system goes out. If the monitor is
powered from the system unit, it will be turned off at the same
time.
turning it on again. The computer may not initialise itself
properly if you turn it off and on again in quick succession.
button again.
OWER