Download Print this page

Removing The Left Side Panel - Mitsubishi Electric Apricot FT S Pentium Series Installation Manual

Advertisement

Removing the left side panel

The left side panel (as viewed from the front) is located by
three pegs at the front, and secured by two thumbscrews
and a keylock at the rear.
The left side panel allows access to the electronics bay
where the motherboard and power distribution board are
located.
To remove the side panel:
1. Power the system down.
2. Unlock the security lock on the rear panel.
3. Unscrew the two thumbscrews.
4. Swing the rear of the panel away from the system unit
until the rear flanges are clear of the system unit.
5. Support the front of the panel and pull it rearwards
to free it from the pegs.
Replacement is simply the reverse of removal.
CASING SCREWS
5

Advertisement

loading