Removing The System Unit Top Cover - Mitsubishi Electric LS Pro Hardware Technical Reference

THICK
ETHERNET
ASSEMBLY
TOKEN RING
MODULE
SW 1
BATTERY
POWER
JUMPER
POWER
HARD DISK
SIGNAL
FLOPPY
DISK
Removing the A keylock on the rear panel of the system unit locks the top cover in place. The
system unit cover cannot be removed unless this is unlocked. The cover is located by a ledge at
top cover the front and lugs on the sides and at the rear. Two thumbscrews in the rear panel
secure the cover.
TOKEN RING
MODULE
HARD DISK
POWER
LS PRO HARDWARE TECHNICAL REFERENCE 2/5
System unit
PARALLEL
PORT
CABLE
LOUDSPEAKER