Power Over Ethernet Powered Device - Planet GS-4210-16T2S User Manual

4.14.4 Power over Ethernet Powered Device

3~5 Watts
6~12 Watts
10~12 Watts
3~12 Watts
3~25 Watts
30 Watts
Since the GS-4210-16P2S and GS-4210-24P2S PoE Managed Switch per PoE port supports
52V DC PoE power output, please check and assure the Powered Device's (PD) acceptable DC
power range is from 52V DC; otherwise, it will damage the Powered Device (PD).
User's Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other
Ethernet/non-Ethernet end-devices to the central where UPS is installed for
un-interrupt power system and power control system.
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory, Warehouse can
install the Access Point any where with no hesitation.
IP Surveillance
Enterprise, Museum, Campus, Hospital, Bank, can install IP Camera
without limits of install location – no need electrician to install AC sockets.
PoE Splitter
PoE Splitter split the PoE 52V DC over the Ethernet cable into 5/12V DC
power output. It frees the device deployment from restrictions due to power
outlet locations, which eliminate the costs for additional AC wiring and
reduces the installation time.
High Power PoE Splitter
High PoE Splitter split the PoE 52V DC over the Ethernet cable into 24/12V
DC power output. It frees the device deployment from restrictions due to
power outlet locations, which eliminate the costs for additional AC wiring
and reduces the installation time.
High Power Speed Dome
This state-of-the-art design is considerable to fit in various network
environments like traffic centers, shopping malls, railway stations,
warehouses, airports, and production facilities for the most demanding
outdoor surveillance applications- no need electrician to install AC sockets.
374