Clock Command; Dos Command - Planet GS-4210-16T2S User Manual

6.3.5 clock Command

Description:
Manage the system clock
Syntax:
clock source local/sntp
clock summer-time
clock timezone

6.3.6 dos Command

Description:
DoS information
Syntax:
dos
daeqsa-deny
icmp-frag-pkts-deny
icmp-ping-max-length
icmpv4-ping-max-check
icmpv6-ping-max-check
ipv6-min-frag-size-check
ipv6-min-frag-size-length
land-deny
nullscan-deny
pod-deny
smurf-deny
smurf-netmask
syn-sportl1024-deny
synfin-deny
synrst-deny
tcp-frag-off-min-check
tcpblat-deny
tcphdr-min-check
tcphdr-min-length
udpblat-deny
xma-deny
User's Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
Destination MAC equals to source MAC
Fragmented ICMP packets
DoS information
Check ICMPv4 ping maximum packets size
Check ICMPv6 ping maximum packets size
Check minimum size of IPv6 fragments
DoS information
Source IP equals to destination IP
NULL Scan Attacks
Ping of Death Attacks
Smurf Attacks
DoS information
SYN packets with sport less than 1024
SYN and FIN bits set in the packet
SYNC and RST bits set in the packet
TCP fragment packet with offset equals to one
Source TCP port equals to destination TCP port
Check minimum TCP header
DoS information
Source UDP port equals to destination UDP port
Xmascan: sequence number is zero and the FIN, URG and PSH bits are set
413