Security; Port Limit Control - Planet SGS-5220-24P2X User Manual

4.12 Security

This section is to control the access of the Managed Switch, includes the user access and management control.
The Security Page contains links to the following main topics:


Port Limit Control


Access Management

HTTPs / SSH

DHCP Snooping

IP Source Guard

ARP Inspection
4.12.1 Port Limit Control
This Page allows you to configure the Port Security Limit Control system and port settings. Limit Control allows for limiting the
number of users on a given port. A user is identified by a MAC address and VLAN ID. If Limit Control is enabled on a port, the
limit specifies the maximum number of users on the port. If this number is exceeded, an action is taken. The action can be one
of the four different actions as described below.
The Limit Control module utilizes a lower-layer module, Port Security module, which manages MAC addresses learnt on the port.
The Limit Control configuration consists of two sections, a system- and a port-wide. The Port Limit Control Configuration screen
in Figure 4-12-1 appears.
Figure 4-12-1: Port Limit Control Configuration Overview Page Screenshot
User's Manual of SGS-5220 Series
263