Radius Server - Planet GS-4210-16T2S User Manual

4.9.10 RADIUS Server

This page is to configure the RADIUS server connection session parameters. The RADIUS Settings screens in
Figure 4-9-60 and Figure 4-9-61
The page includes the following fields:
Object
• Retries
• Timeout for Reply
• Dead Time
• Key String
Button
: Click to apply changes.
User's Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
appear.
Figure 4-9-59: Radius Server Setting Page Screenshot
Description
Timeout is the number of seconds, in the range 1 to 10, to wait for a reply from a
RADIUS server before retransmitting the request. Default is 3.
Retransmit is the number of times, in the range 1 to 30, a RADIUS request is
retransmitted to a server that is not responding. If the server has not responded
after the last retransmit it is considered to be dead. Default is 3.
The Dead Time, which can be set to a number between 0 and 2000 seconds, is
the period during which the switch will not send new requests to a server that has
failed to respond to a previous request. This will stop the switch from continually
trying to contact a server that it has already determined as dead.
Setting the Dead Time to a value greater than 0 (zero) will enable this feature, but
only if more than one server has been configured. Default is 0.
The secret key - up to 128 characters long - shared between the RADIUS server
and the switch.
298
Figure 4-9-59,